Product Center

Polytetrafluoroethylene resin 4S02

It exhibits excellent chemical stability, superior electrical insulation, a low coefficient of friction, and outstanding self-lubricating properties. Its service temperature range is –250°C to +260°C, and it can be used continuously without any change in its properties.

Polytetrafluoroethylene fine‑particle resin is a white granular material that exhibits excellent chemical stability, superior electrical insulation, a low coefficient of friction, and outstanding self‑lubricating properties. Its service temperature range is –250°C to +260°C.

 

1. Product Grades and Applications:

Card Number

Application

4S02-A

Suitable for processing high-strength, densely packed molded products.

4S02-B

Suitable for processing densely packed molded products.

4S02-C

Suitable for processing high-strength molded or filled products.

4S02-D

Suitable for processing general filled products.

 

2. Product Performance:

Item

Indicator

4S02-A

4S02-B

4S02-C

4S02-D

Tensile strength, MPa ≥

34

27.4

27.4

25.5

Elongation at break, % ≥

300

280

Bulk density, g/L

300~450

Particle size (retained on a 65 µm sieve) % ≤

3

Moisture content, % ≤

0.04

Melting point, °C

327±5

Standard relative density

2.13~2.19

Thermal instability index ≤

50

 

3. Packaging, Storage, and Transportation:

1. The product is packaged in double-layer plastic bags and packed in rigid cardboard drums, with a net weight of 25 kg per drum.

2. The product should be stored in a clean, cool, and dry environment to prevent the ingress of contaminants such as dust and moisture. During storage, keep the container tightly sealed, and when opening it, take precautions to avoid the entry of dust and other impurities.

3. This product is to be transported as a non-hazardous material. During transit, it should be protected from moisture, heat, severe vibration, and impact or compression to prevent the resin from caking.

 

4. Precautions:

1. Before use, allow the material to stand in an environment of 22°C to 25°C for at least 24 hours prior to sieving and compression.

2. During sintering, this product must be equipped with an exhaust ventilation system to prevent inhalation of toxic gases. Additionally, it should not be processed at temperatures exceeding 390°C.

Related products

Send Us a Message

Contact Us

Submit Message