News Center

03

2026

-

11

HUAFU Fluorinated Fluids HFE-347 (FM 300)

Hydrofluoroethers (HFEs) are a widely used class of alternatives to ozone-depleting solvents, offering advantages such as environmental friendliness, low toxicity and non-corrosiveness


Under international agreements such as the Montreal Protocol, the use of ozone-depleting solvents, including CFCs and HCFCs, has been strictly restricted. As precision manufacturing and environmental standards become increasingly stringent, companies need high-performance alternatives to ozone-depleting solvents that meet both technical and environmental requirements. Hydrofluoroethers (HFEs) are a widely used class of alternatives to ozone-depleting solvents, offering advantages such as environmental friendliness, low toxicity and non-corrosiveness. HFE-347 fluorinated fluid (product grade: FM 300), manufactured by SDHF-Shandong Huafu Chemical Co., Ltd., offers excellent cleaning performance and material compatibility. It is used in demanding applications involving semiconductors, electronics, optics and medical devices.

I. Product Information

1.Physicochemical Properties

Huafu Product Grade

FM 300

Product

HFE-347

Molecular formula

C4H3F7O

Molecular weight

200.05

CAS

406-78-0

Boiling point/℃

56.2

Flash point (℃)

None

ODP

0

GWP

540

Atmospheric lifetime(Years)

6.0

Density/(g/cm3)

1.49

Kauri-butanol (KB) value

13

Solubility in water

Practically insoluble in water

Surface tension/(mN/m)

16.4

Specific heat capacity/(kJ/kg·K)

1.26

Viscosity at 25℃(mPa·s)

0.68

 

2. Quality Specifications

Parameter

FM 300

Appearance

Colorless, transparent and homogeneous liquid

Purity(%) ≥

99.9

Moisture(ppm)  ≤

50

Acidity (as HF,ppm)  ≤

1

II. Product Features

FM 300 produced by Shandong Huafu Chemical Co., Ltd. exhibits remarkable competitive advantages in practical applications:

  • Efficient cleaning: With a boiling point of 56.2°C and a moderate evaporation rate, FM 300 has a KB value of 13 and can achieve effective precision cleaning when used with suitable cleaning equipment. Its density of 1.49 g/cm³ and surface tension of 16.4 mN/m allow it to penetrate narrow gaps for thorough cleaning.
  • Environmental Compliance: FM 300 has an ozone depletion potential (ODP) of zero, consistent with the objectives of the Montreal Protocol. It has a global warming potential (GWP) of 540 and a relatively short atmospheric lifetime, supporting efforts to manage greenhouse gas emissions in accordance with applicable regulations.
  • Non-flammable with excellent electrical insulation properties and outstanding operational safety: no flash point, completely non-combustible, low toxicity and non-corrosive; high volume resistivity and dielectric strength, good thermal stability, resistant to decomposition and deterioration. It can be directly used for special working conditions that other HFEs struggle to handle, such as electric insulation of components and leak testing.

III. Product Application

Based on its properties, FM 300 is primarily used in precision electronics cleaning, optical component cleaning and electronic manufacturing.

1. Precision Cleaning for Electronics and Semiconductors

FM 300 can remove flux residues, particles and fluorinated oil contaminants from wafers, packaged components and PCBs, and is suitable for processes such as post-etch cleaning and pre-packaging treatment. Meanwhile, with its unique advantages of excellent electrical insulation properties and non-flammability, it can be used as a leak-testing fluid for airtightness testing and an insulating fluid for live cleaning of electronic components.

 

2. Cleaning of Optical and Display Devices

FM 300 features low surface tension and selective solvency. It can be used for precision cleaning in the manufacturing of optical lenses, camera lenses, optoelectronic modules and OLED panels to remove oil stains, dust and fingerprints. It can also serve as a diluent for anti-fingerprint coatings, leaving no residue after cleaning and causing no damage to optical performance.

 

3. Medical device cleaning

Fluorinated liquid FM 300 can also be used for cleaning medical devices, especially precision medical devices such as endoscopes, catheters and surgical instruments. It is particularly suitable for devices that need to remove grease, dust and fine particles. It can effectively eliminate surface contaminants and leave no residue or watermarks after cleaning.

 

4. Other Applications

•  Insulation and protection: With a dielectric strength of 40 kV, it can be used as a temporary insulating fluid for electrical equipment to reduce the risks of live-line work.

•  Eco-friendly alternative: It can serve as an alternative to ozone-depleting solvents such as CFCs and HCFCs in applications including chemical synthesis and precision instrument cleaning.

Shandong Huafu Chemical Co., Ltd. specializes in the development, production and operation of fluorine-containing new materials. The organofluorine fine chemicals manufactured by the company are applied in pesticide intermediates, electrolyte additives/solvents, immersion cooling fluids and precision cleaning. Especially in the cleaning sector for OLED manufacturing, it serves leading domestic enterprises and has reached an industry-leading level.

Contact Us

Submit Message